Fuel and air metering
P0102Mass air flow (MAF) circuit low
OK to drive to a check
What does P0102 mean?
P0102 means the signal from the mass air flow sensor is lower than it should ever be. That usually points to an electrical problem, such as an unplugged sensor, a damaged wire or a failed sensor, rather than to the engine itself.
What can cause P0102?
- Sensor connector unplugged or loose
- Damaged, loose or corroded wiring or connector
- The sensor itself has failed
- A dirty or failing mass air flow (MAF) sensor
Only an inspection can tell which of these applies to your car.
What you might notice
- The check-engine light is on
- Hesitation or less power when accelerating
- The engine may stall or be hard to start
- Higher fuel use
Can I keep driving with P0102?
OK to drive to a check
The car can usually be driven normally to a workshop. Book a check in the coming weeks, and sooner if anything changes.
What you can safely check yourself
- With the engine off and cool, look at the part's plug and wiring for anything loose, broken or chewed. Don't unplug anything while the engine runs.
- Think about recent repairs: a part just replaced or a plug left loose is a frequent cause.
- Check that the air filter is not clogged and that its box is closed and clipped shut.
When to see a technician
Within the next few weeks, or sooner if the engine stalls. A technician can check the sensor's power, ground and signal wires.
General information written with AI help; not yet reviewed by a certified technician. A real inspection is the only way to be sure. Terms of Use
Not sure what your car has?
Describe what you see, hear or feel. AI CarCare helps you understand the likely causes and what to ask before you visit a workshop.
Ask AI CarCare about your carMore codes: Fuel and air metering
- P0087Fuel rail/system pressure too low
- P0101Mass air flow (MAF) circuit range/performance
- P0106Manifold absolute pressure (MAP) circuit range/performance
- P0113Intake air temperature (IAT) sensor 1 circuit high
- P0121Throttle/pedal position sensor A circuit range/performance
- P0122Throttle/pedal position sensor A circuit low
- P0123Throttle/pedal position sensor A circuit high
- P0171System too lean (bank 1)