Fuel and air metering
P0123Throttle/pedal position sensor A circuit high
Drive carefully and get it checked soon
What does P0123 mean?
P0123 means the signal from throttle position sensor A is higher than its normal range, often because of an open ground wire, a short to voltage or a failed sensor.
What can cause P0123?
- Damaged, loose or corroded wiring or connector
- The sensor itself has failed
- A poor ground (earth) connection to the engine or body
Only an inspection can tell which of these applies to your car.
What you might notice
- The check-engine light is on
- Reduced power mode: the car limits its speed and power to protect itself
- Idle speed too high
Can I keep driving with P0123?
Drive carefully and get it checked soon
Drive gently and only as far as you need. Avoid long trips, high speed and heavy loads, and get it checked within days, not weeks.
What you can safely check yourself
- With the engine off and cool, look at the part's plug and wiring for anything loose, broken or chewed. Don't unplug anything while the engine runs.
- Think about recent repairs: a part just replaced or a plug left loose is a frequent cause.
When to see a technician
Soon. The car may limit power suddenly, which is unpleasant in traffic.
General information written with AI help; not yet reviewed by a certified technician. A real inspection is the only way to be sure. Terms of Use
Not sure what your car has?
Describe what you see, hear or feel. AI CarCare helps you understand the likely causes and what to ask before you visit a workshop.
Ask AI CarCare about your carMore codes: Fuel and air metering
- P0106Manifold absolute pressure (MAP) circuit range/performance
- P0113Intake air temperature (IAT) sensor 1 circuit high
- P0121Throttle/pedal position sensor A circuit range/performance
- P0122Throttle/pedal position sensor A circuit low
- P0171System too lean (bank 1)
- P0172System too rich (bank 1)
- P0174System too lean (bank 2)
- P0175System too rich (bank 2)