AI CarCare
All OBD-II codes

Fuel and air metering

P0122Throttle/pedal position sensor A circuit low

Drive carefully and get it checked soon

What does P0122 mean?

P0122 means the signal from throttle position sensor A is lower than its normal range. This usually points to an electrical fault such as a short to ground, a broken reference wire or a failed sensor.

What can cause P0122?

  • Damaged, loose or corroded wiring or connector
  • The sensor itself has failed
  • Water in the connector

Only an inspection can tell which of these applies to your car.

What you might notice

  • The check-engine light is on
  • Reduced power mode: the car limits its speed and power to protect itself
  • Hesitation or less power when accelerating
  • The engine may stall or be hard to start

Can I keep driving with P0122?

Drive carefully and get it checked soon

Drive gently and only as far as you need. Avoid long trips, high speed and heavy loads, and get it checked within days, not weeks.

What you can safely check yourself

  • With the engine off and cool, look at the part's plug and wiring for anything loose, broken or chewed. Don't unplug anything while the engine runs.
  • Think about recent repairs: a part just replaced or a plug left loose is a frequent cause.

When to see a technician

Soon. A technician tests the sensor's wiring and voltage before replacing parts.

General information written with AI help; not yet reviewed by a certified technician. A real inspection is the only way to be sure. Terms of Use

Not sure what your car has?

Describe what you see, hear or feel. AI CarCare helps you understand the likely causes and what to ask before you visit a workshop.

Ask AI CarCare about your car

More codes: Fuel and air metering