AI CarCare
All OBD-II codes

Fuel and air metering

P0101Mass air flow (MAF) circuit range/performance

OK to drive to a check

What does P0101 mean?

P0101 means the reading from the mass air flow sensor, which measures how much air enters the engine, does not fit what the engine computer expects from other readings such as throttle position and engine speed.

What can cause P0101?

  • A dirty or failing mass air flow (MAF) sensor
  • An air leak between the sensor and the engine, such as a loose intake hose
  • A clogged air filter
  • Damaged, loose or corroded wiring or connector

Only an inspection can tell which of these applies to your car.

What you might notice

  • The check-engine light is on
  • Hesitation or less power when accelerating
  • Rough or unsteady idle
  • Higher fuel use

Can I keep driving with P0101?

OK to drive to a check

The car can usually be driven normally to a workshop. Book a check in the coming weeks, and sooner if anything changes.

What you can safely check yourself

  • Check that the air filter is not clogged and that its box is closed and clipped shut.
  • Check that the large rubber hose between the air filter box and the engine is firmly clamped and not split.
  • With the engine off and cool, look at the part's plug and wiring for anything loose, broken or chewed. Don't unplug anything while the engine runs.

When to see a technician

Within the next few weeks. Compare live sensor readings before buying a new sensor: a split hose or dirty sensor is often the real cause.

General information written with AI help; not yet reviewed by a certified technician. A real inspection is the only way to be sure. Terms of Use

Not sure what your car has?

Describe what you see, hear or feel. AI CarCare helps you understand the likely causes and what to ask before you visit a workshop.

Ask AI CarCare about your car

More codes: Fuel and air metering