Camshaft and crankshaft timing
P0341Camshaft position sensor A circuit range/performance (bank 1 or single sensor)
Drive carefully and get it checked soon
What does P0341 mean?
P0341 means the camshaft sensor A signal is there but doesn't make sense compared with the crankshaft signal. It can be the sensor, its wiring, or timing that has moved.
What can cause P0341?
- The sensor itself has failed
- Damaged, loose or corroded wiring or connector
- A stretched timing chain or a timing belt that has jumped a tooth
- A weak battery or poor battery connections
Only an inspection can tell which of these applies to your car.
What you might notice
- The check-engine light is on
- Long cranking before the engine starts
- Rough or unsteady idle
Can I keep driving with P0341?
Drive carefully and get it checked soon
Drive gently and only as far as you need. Avoid long trips, high speed and heavy loads, and get it checked within days, not weeks.
What you can safely check yourself
- Look at the battery terminals: they should be tight and free of white or green crust.
- With the engine off and cool, look at the part's plug and wiring for anything loose, broken or chewed. Don't unplug anything while the engine runs.
When to see a technician
Soon. A timing chain or belt that has slipped can get worse and, in the worst case, let the valves hit the pistons. Tell the technician if you hear a rattle from the front of the engine at start-up.
General information written with AI help; not yet reviewed by a certified technician. A real inspection is the only way to be sure. Terms of Use
Not sure what your car has?
Describe what you see, hear or feel. AI CarCare helps you understand the likely causes and what to ask before you visit a workshop.
Ask AI CarCare about your carMore codes: Camshaft and crankshaft timing
- P0011Camshaft position A timing over-advanced or system performance (bank 1)
- P0012Camshaft position A timing over-retarded (bank 1)
- P0014Camshaft position B timing over-advanced or system performance (bank 1)
- P0016Crankshaft position – camshaft position correlation (bank 1 sensor A)
- P0017Crankshaft position – camshaft position correlation (bank 1 sensor B)
- P0335Crankshaft position sensor A circuit
- P0336Crankshaft position sensor A circuit range/performance
- P0340Camshaft position sensor A circuit (bank 1 or single sensor)