AI CarCare
All OBD-II codes

Camshaft and crankshaft timing

P0336Crankshaft position sensor A circuit range/performance

Drive carefully and get it checked soon

What does P0336 mean?

P0336 means the crankshaft position sensor's signal is present but erratic: pulses are missing or arrive at odd times. The computer may misread engine speed, causing stumbling or stalling.

What can cause P0336?

  • The sensor itself has failed
  • Damaged, loose or corroded wiring or connector
  • A damaged or dirty reluctor ring
  • Electrical interference from a poorly routed wire

Only an inspection can tell which of these applies to your car.

What you might notice

  • The check-engine light is on
  • The engine may stall or be hard to start
  • The engine shakes, especially at idle or when accelerating

Can I keep driving with P0336?

Drive carefully and get it checked soon

Drive gently and only as far as you need. Avoid long trips, high speed and heavy loads, and get it checked within days, not weeks.

The engine can cut out without warning, so avoid busy roads and motorways until it is fixed.

What you can safely check yourself

  • With the engine off and cool, look at the part's plug and wiring for anything loose, broken or chewed. Don't unplug anything while the engine runs.
  • Think about recent repairs: a part just replaced or a plug left loose is a frequent cause.

When to see a technician

Soon. A technician can look at the sensor signal on a scope to tell a bad sensor from damaged teeth.

General information written with AI help; not yet reviewed by a certified technician. A real inspection is the only way to be sure. Terms of Use

Not sure what your car has?

Describe what you see, hear or feel. AI CarCare helps you understand the likely causes and what to ask before you visit a workshop.

Ask AI CarCare about your car

More codes: Camshaft and crankshaft timing