Camshaft and crankshaft timing
P0335Crankshaft position sensor A circuit
Drive carefully and get it checked soon
What does P0335 mean?
P0335 means the engine computer gets no usable signal from the crankshaft position sensor, which tells it engine speed and piston position. Without that signal the engine may not start, or may cut out while driving.
What can cause P0335?
- The sensor itself has failed
- Damaged, loose or corroded wiring or connector
- A damaged reluctor ring (the toothed wheel the sensor reads)
Only an inspection can tell which of these applies to your car.
What you might notice
- The check-engine light is on
- The engine may stall or be hard to start
- The rev counter may drop to zero while cranking
Can I keep driving with P0335?
Drive carefully and get it checked soon
Drive gently and only as far as you need. Avoid long trips, high speed and heavy loads, and get it checked within days, not weeks.
The engine can cut out without warning, so avoid busy roads and motorways until it is fixed.
What you can safely check yourself
- With the engine off and cool, look at the part's plug and wiring for anything loose, broken or chewed. Don't unplug anything while the engine runs.
- Write down when it happens: cold or warm engine, speed, weather, and any new noise or smell. This helps the technician a lot.
When to see a technician
Soon, before the car leaves you stranded. The sensor is often inexpensive, but its wiring should be checked too.
General information written with AI help; not yet reviewed by a certified technician. A real inspection is the only way to be sure. Terms of Use
Not sure what your car has?
Describe what you see, hear or feel. AI CarCare helps you understand the likely causes and what to ask before you visit a workshop.
Ask AI CarCare about your carMore codes: Camshaft and crankshaft timing
- P0011Camshaft position A timing over-advanced or system performance (bank 1)
- P0012Camshaft position A timing over-retarded (bank 1)
- P0014Camshaft position B timing over-advanced or system performance (bank 1)
- P0016Crankshaft position – camshaft position correlation (bank 1 sensor A)
- P0017Crankshaft position – camshaft position correlation (bank 1 sensor B)
- P0336Crankshaft position sensor A circuit range/performance
- P0340Camshaft position sensor A circuit (bank 1 or single sensor)
- P0341Camshaft position sensor A circuit range/performance (bank 1 or single sensor)