Camshaft and crankshaft timing
P0010Camshaft position actuator A circuit (bank 1)
Drive carefully and get it checked soon
What does P0010 mean?
P0010 means the engine computer sees an electrical problem in the circuit of the valve that shifts camshaft timing on bank 1. That valve, often called the VVT solenoid, uses engine oil pressure to advance or retard the camshaft for better power and economy.
What can cause P0010?
- A sticking or failed camshaft timing oil control valve (often called the VVT solenoid)
- Damaged, loose or corroded wiring or connector
- Rarely, a fault in the engine computer itself
Only an inspection can tell which of these applies to your car.
What you might notice
- The check-engine light is on
- Rough or unsteady idle
- Hesitation or less power when accelerating
- Higher fuel use
Can I keep driving with P0010?
Drive carefully and get it checked soon
Drive gently and only as far as you need. Avoid long trips, high speed and heavy loads, and get it checked within days, not weeks.
What you can safely check yourself
- On level ground, a few minutes after switching off, check the oil level on the dipstick, and remember when the oil was last changed.
- With the engine off and cool, look at the part's plug and wiring for anything loose, broken or chewed. Don't unplug anything while the engine runs.
When to see a technician
Soon. The valve and its wiring are usually easy for a technician to test.
General information written with AI help; not yet reviewed by a certified technician. A real inspection is the only way to be sure. Terms of Use
Not sure what your car has?
Describe what you see, hear or feel. AI CarCare helps you understand the likely causes and what to ask before you visit a workshop.
Ask AI CarCare about your carMore codes: Camshaft and crankshaft timing
- P0011Camshaft position A timing over-advanced or system performance (bank 1)
- P0012Camshaft position A timing over-retarded (bank 1)
- P0014Camshaft position B timing over-advanced or system performance (bank 1)
- P0016Crankshaft position – camshaft position correlation (bank 1 sensor A)
- P0017Crankshaft position – camshaft position correlation (bank 1 sensor B)
- P0335Crankshaft position sensor A circuit
- P0336Crankshaft position sensor A circuit range/performance
- P0340Camshaft position sensor A circuit (bank 1 or single sensor)