Ignition and misfire
P0325Knock sensor 1 circuit (bank 1 or single sensor)
OK to drive to a check
What does P0325 mean?
P0325 means the engine computer has lost the signal from the knock sensor, a small microphone-like part that listens for pinging (fuel burning too early). Without it the computer cannot hear knock, so it usually plays safe and reduces power a little.
What can cause P0325?
- Damaged, loose or corroded wiring or connector
- The sensor itself has failed
- A sensor bolt that is loose or over-tightened
Only an inspection can tell which of these applies to your car.
What you might notice
- The check-engine light is on
- Slightly less power and higher fuel use
- Sometimes a pinging sound under load
Can I keep driving with P0325?
OK to drive to a check
The car can usually be driven normally to a workshop. Book a check in the coming weeks, and sooner if anything changes.
What you can safely check yourself
- Use the fuel grade (octane) the owner's manual recommends.
- Think about recent repairs: a part just replaced or a plug left loose is a frequent cause.
When to see a technician
Within the next few weeks. On some engines the sensor sits under the intake manifold, which makes the job longer.
General information written with AI help; not yet reviewed by a certified technician. A real inspection is the only way to be sure. Terms of Use
Not sure what your car has?
Describe what you see, hear or feel. AI CarCare helps you understand the likely causes and what to ask before you visit a workshop.
Ask AI CarCare about your carMore codes: Ignition and misfire
- P0305Cylinder 5 misfire detected
- P0306Cylinder 6 misfire detected
- P0307Cylinder 7 misfire detected
- P0308Cylinder 8 misfire detected
- P0316Engine misfire detected on startup (first 1000 revolutions)
- P0327Knock sensor 1 circuit low (bank 1 or single sensor)
- P0351Ignition coil A primary/secondary circuit
- P0352Ignition coil B primary/secondary circuit