AI CarCare
All OBD-II codes

Ignition and misfire

P0308Cylinder 8 misfire detected

Drive carefully and get it checked soon

What does P0308 mean?

P0308 means the engine computer has noticed that cylinder 8 is misfiring: the fuel in it is not burning properly, so the engine shakes and loses some power. Because only one cylinder is affected, the cause is often a part that serves that cylinder alone, such as its spark plug, ignition coil or fuel injector. Cylinder numbering differs between engines; the service information for yours shows which one is number 8.

What can cause P0308?

  • Worn or fouled spark plugs
  • A weak or failed ignition coil
  • A clogged or failed fuel injector on cylinder 8
  • A loose coil or injector connector
  • Low compression from a worn valve or a leaking head gasket (less common)

Only an inspection can tell which of these applies to your car.

What you might notice

  • The engine shakes, especially at idle or when accelerating
  • Hesitation or less power when accelerating
  • The check-engine light may flash while the misfire happens
  • Higher fuel use

Can I keep driving with P0308?

Drive carefully and get it checked soon

Drive gently and only as far as you need. Avoid long trips, high speed and heavy loads, and get it checked within days, not weeks.

If the check-engine light flashes, slow down and stop safely: unburned fuel can overheat the catalytic converter and, in rare cases, start a fire.

What you can safely check yourself

  • With the engine off and cool, look at the part's plug and wiring for anything loose, broken or chewed. Don't unplug anything while the engine runs.
  • Think back to your last fill-up: a problem that began right after it can point to poor fuel.
  • Write down when it happens: cold or warm engine, speed, weather, and any new noise or smell. This helps the technician a lot.

When to see a technician

Soon. A technician can test the spark plug, coil and injector of that cylinder, for example by swapping parts between cylinders to see whether the misfire moves, and check compression if needed.

General information written with AI help; not yet reviewed by a certified technician. A real inspection is the only way to be sure. Terms of Use

Not sure what your car has?

Describe what you see, hear or feel. AI CarCare helps you understand the likely causes and what to ask before you visit a workshop.

Ask AI CarCare about your car

More codes: Ignition and misfire