AI CarCare
All OBD-II codes

Ignition and misfire

P0316Engine misfire detected on startup (first 1000 revolutions)

OK to drive to a check

What does P0316 mean?

P0316 means the engine misfired in the first moments after starting, within roughly the first thousand turns of the engine. Damp weather, worn spark plugs or a fuel problem at start-up are typical reasons.

What can cause P0316?

  • Moisture on the ignition coils or spark plugs
  • Worn or fouled spark plugs
  • A fuel injector that leaks while the engine is off
  • Low fuel pressure at start-up
  • Coolant leaking into a cylinder (less common, but serious)

Only an inspection can tell which of these applies to your car.

What you might notice

  • Rough running for a few seconds after starting
  • The check-engine light is on
  • White smoke at start-up

Can I keep driving with P0316?

OK to drive to a check

The car can usually be driven normally to a workshop. Book a check in the coming weeks, and sooner if anything changes.

If the coolant level keeps dropping or you see white smoke with a sweet smell, have it checked soon: coolant may be getting into the engine.

What you can safely check yourself

  • When the engine is completely cold, check the coolant level in the see-through tank. Never open the cap on a hot engine.
  • Write down when it happens: cold or warm engine, speed, weather, and any new noise or smell. This helps the technician a lot.
  • Ask for every stored code to be read: the other codes stored with it often point to the real cause.

When to see a technician

Within the next few weeks, or sooner if the coolant level drops.

General information written with AI help; not yet reviewed by a certified technician. A real inspection is the only way to be sure. Terms of Use

Not sure what your car has?

Describe what you see, hear or feel. AI CarCare helps you understand the likely causes and what to ask before you visit a workshop.

Ask AI CarCare about your car

More codes: Ignition and misfire