Transmission
P0740Torque converter clutch solenoid circuit/open
Drive carefully and get it checked soon
What does P0740 mean?
P0740 means the computer sees an electrical fault in the solenoid that controls the torque converter clutch. That clutch locks the engine to the transmission at cruising speed to save fuel and reduce heat.
What can cause P0740?
- A failed torque converter clutch solenoid
- Damaged, loose or corroded wiring or connector
- Transmission fluid that is low, old or burnt
Only an inspection can tell which of these applies to your car.
What you might notice
- Higher engine revs at steady speed
- Higher fuel use
- The check-engine light is on
Can I keep driving with P0740?
Drive carefully and get it checked soon
Drive gently and only as far as you need. Avoid long trips, high speed and heavy loads, and get it checked within days, not weeks.
Drive gently and avoid towing or heavy loads until it is checked. If the car won't move, slips badly or a transmission temperature light comes on, stop safely.
What you can safely check yourself
- If your car has a transmission dipstick, check the fluid level and colour as the owner's manual describes. Many newer cars need a workshop for this.
- Write down when it happens: cold or warm engine, speed, weather, and any new noise or smell. This helps the technician a lot.
When to see a technician
Soon. Extra heat from a converter that never locks shortens the life of the transmission fluid.
General information written with AI help; not yet reviewed by a certified technician. A real inspection is the only way to be sure. Terms of Use
Not sure what your car has?
Describe what you see, hear or feel. AI CarCare helps you understand the likely causes and what to ask before you visit a workshop.
Ask AI CarCare about your car