AI CarCare
All OBD-II codes

Transmission

P0705Transmission range sensor A circuit (PRNDL input)

Drive carefully and get it checked soon

What does P0705 mean?

P0705 means the sensor that tells the computer which position the gear selector is in (P, R, N or D) gives a faulty signal. The car may not start in Park, the gear display may be wrong, or the reversing lights may not work.

What can cause P0705?

  • A worn or misadjusted range sensor
  • Damaged, loose or corroded wiring or connector
  • A stretched selector cable

Only an inspection can tell which of these applies to your car.

What you might notice

  • No start in Park, or only starts in Neutral
  • Wrong gear shown on the display
  • Reversing lights don't work
  • Harsh, late or missing gear changes

Can I keep driving with P0705?

Drive carefully and get it checked soon

Drive gently and only as far as you need. Avoid long trips, high speed and heavy loads, and get it checked within days, not weeks.

Drive gently and avoid towing or heavy loads until it is checked. If the car won't move, slips badly or a transmission temperature light comes on, stop safely.

What you can safely check yourself

  • Make sure the selector moves cleanly into each position and the display matches it.
  • Write down when it happens: cold or warm engine, speed, weather, and any new noise or smell. This helps the technician a lot.

When to see a technician

Soon. A wrong position signal can affect starting and safety interlocks.

General information written with AI help; not yet reviewed by a certified technician. A real inspection is the only way to be sure. Terms of Use

Not sure what your car has?

Describe what you see, hear or feel. AI CarCare helps you understand the likely causes and what to ask before you visit a workshop.

Ask AI CarCare about your car

More codes: Transmission