AI CarCare
All OBD-II codes

Transmission

P0730Incorrect gear ratio

Drive carefully and get it checked soon

What does P0730 mean?

P0730 means the speeds going into and out of the transmission don't match any gear, so the transmission is slipping or a shift did not complete. Low or burnt fluid, worn internal clutches or a valve body problem are possible.

What can cause P0730?

  • Transmission fluid that is low, old or burnt
  • Worn internal clutches or bands
  • A faulty shift solenoid or valve body

Only an inspection can tell which of these applies to your car.

What you might notice

  • The engine revs rise without the car speeding up (slipping)
  • Harsh, late or missing gear changes
  • The transmission may stay in one gear
  • The check-engine light is on

Can I keep driving with P0730?

Drive carefully and get it checked soon

Drive gently and only as far as you need. Avoid long trips, high speed and heavy loads, and get it checked within days, not weeks.

Drive gently and avoid towing or heavy loads until it is checked. If the car won't move, slips badly or a transmission temperature light comes on, stop safely.

What you can safely check yourself

  • If your car has a transmission dipstick, check the fluid level and colour as the owner's manual describes. Many newer cars need a workshop for this.
  • Write down when it happens: cold or warm engine, speed, weather, and any new noise or smell. This helps the technician a lot.

When to see a technician

Soon. The longer a slipping transmission is driven, the more expensive the repair tends to be.

General information written with AI help; not yet reviewed by a certified technician. A real inspection is the only way to be sure. Terms of Use

Not sure what your car has?

Describe what you see, hear or feel. AI CarCare helps you understand the likely causes and what to ask before you visit a workshop.

Ask AI CarCare about your car

More codes: Transmission