AI CarCare
All OBD-II codes

Cooling and oil pressure

P0520Engine oil pressure sensor/switch A circuit

Drive carefully and get it checked soon

What does P0520 mean?

P0520 means the engine computer sees an electrical fault in the oil pressure sensor or switch circuit, so it can no longer tell whether oil pressure is normal. That matters because low oil pressure can wreck an engine quickly.

What can cause P0520?

  • The sensor itself has failed
  • Damaged, loose or corroded wiring or connector
  • Oil leaking into the sensor connector

Only an inspection can tell which of these applies to your car.

What you might notice

  • The check-engine light is on
  • The oil warning light flickers or stays on
  • The oil pressure gauge (if fitted) reads oddly

Can I keep driving with P0520?

Drive carefully and get it checked soon

Drive gently and only as far as you need. Avoid long trips, high speed and heavy loads, and get it checked within days, not weeks.

Check the oil level first. If the red oil pressure light is on, or the engine knocks or ticks loudly, stop safely and don't drive on.

What you can safely check yourself

  • On level ground, a few minutes after switching off, check the oil level on the dipstick, and remember when the oil was last changed.
  • With the engine off and cool, look at the part's plug and wiring for anything loose, broken or chewed. Don't unplug anything while the engine runs.

When to see a technician

Soon. A technician measures the real oil pressure with a gauge to be sure the engine is safe.

General information written with AI help; not yet reviewed by a certified technician. A real inspection is the only way to be sure. Terms of Use

Not sure what your car has?

Describe what you see, hear or feel. AI CarCare helps you understand the likely causes and what to ask before you visit a workshop.

Ask AI CarCare about your car

More codes: Cooling and oil pressure