Cooling and oil pressure
P0480Fan 1 control circuit
Drive carefully and get it checked soon
What does P0480 mean?
P0480 means the engine computer cannot control cooling fan 1 properly. Without the fan, the engine can overheat in slow traffic or with the air conditioning on.
What can cause P0480?
- A failed fan relay or blown fuse
- A failed fan motor or fan control module
- Damaged, loose or corroded wiring or connector
Only an inspection can tell which of these applies to your car.
What you might notice
- The check-engine light is on
- The temperature rises in traffic and drops when moving
- Weak air conditioning when stopped
Can I keep driving with P0480?
Drive carefully and get it checked soon
Drive gently and only as far as you need. Avoid long trips, high speed and heavy loads, and get it checked within days, not weeks.
Watch the temperature gauge, especially in traffic and hot weather. If it rises towards hot, stop safely and let the engine cool.
What you can safely check yourself
- Check the fuse for that circuit in the fuse box, using the diagram in the owner's manual. A fuse that keeps blowing needs a technician.
- Keep an eye on the temperature gauge. If it climbs towards hot or you see steam, stop safely.
When to see a technician
Soon, especially before hot weather or long trips.
General information written with AI help; not yet reviewed by a certified technician. A real inspection is the only way to be sure. Terms of Use
Not sure what your car has?
Describe what you see, hear or feel. AI CarCare helps you understand the likely causes and what to ask before you visit a workshop.
Ask AI CarCare about your carMore codes: Cooling and oil pressure
- P0115Engine coolant temperature sensor 1 circuit
- P0117Engine coolant temperature sensor 1 circuit low
- P0118Engine coolant temperature sensor 1 circuit high
- P0125Insufficient coolant temperature for closed loop fuel control
- P0128Coolant thermostat (coolant temperature below thermostat regulating temperature)
- P0217Engine coolant over temperature condition
- P0520Engine oil pressure sensor/switch A circuit
- P0524Engine oil pressure too low