AI CarCare
All OBD-II codes

Cooling and oil pressure

P0118Engine coolant temperature sensor 1 circuit high

Drive carefully and get it checked soon

What does P0118 mean?

P0118 means the coolant temperature sensor's signal is so high that it reads as a freezing-cold engine. This usually means an open circuit: an unplugged connector, a broken wire or a failed sensor.

What can cause P0118?

  • Sensor connector unplugged or corroded
  • Damaged, loose or corroded wiring or connector
  • The sensor itself has failed

Only an inspection can tell which of these applies to your car.

What you might notice

  • The check-engine light is on
  • The engine runs rich: higher fuel use, fuel smell
  • The cooling fan may run all the time

Can I keep driving with P0118?

Drive carefully and get it checked soon

Drive gently and only as far as you need. Avoid long trips, high speed and heavy loads, and get it checked within days, not weeks.

What you can safely check yourself

  • With the engine off and cool, look at the part's plug and wiring for anything loose, broken or chewed. Don't unplug anything while the engine runs.
  • When the engine is completely cold, check the coolant level in the see-through tank. Never open the cap on a hot engine.
  • Keep an eye on the temperature gauge. If it climbs towards hot or you see steam, stop safely.

When to see a technician

Soon. Running rich for long can foul the spark plugs and the catalytic converter.

General information written with AI help; not yet reviewed by a certified technician. A real inspection is the only way to be sure. Terms of Use

Not sure what your car has?

Describe what you see, hear or feel. AI CarCare helps you understand the likely causes and what to ask before you visit a workshop.

Ask AI CarCare about your car

More codes: Cooling and oil pressure