AI CarCare
All OBD-II codes

Network communication

U0100Lost communication with ECM/PCM A

Drive carefully and get it checked soon

What does U0100 mean?

U0100 means other modules have stopped hearing messages from the engine computer. The car's computers (modules) talk to each other over a network of wires called the CAN bus. The engine may stall or not start, and gauges may act strangely.

What can cause U0100?

  • A damaged or corroded network wire or connector between modules
  • Loss of power or ground to the engine computer, such as a blown fuse
  • A weak battery or poor battery connections
  • A fault in the control module that stopped talking

Only an inspection can tell which of these applies to your car.

What you might notice

  • The engine may stall or be hard to start
  • Several warning lights on at once
  • No start

Can I keep driving with U0100?

Drive carefully and get it checked soon

Drive gently and only as far as you need. Avoid long trips, high speed and heavy loads, and get it checked within days, not weeks.

The engine may stall without warning, so avoid motorways and busy roads until it is checked.

What you can safely check yourself

  • Look at the battery terminals: they should be tight and free of white or green crust.
  • Think about recent repairs: a part just replaced or a plug left loose is a frequent cause.
  • Note which warning lights came on together; that helps locate the fault.

When to see a technician

Soon. Power, ground and network wiring to the engine computer are checked first.

General information written with AI help; not yet reviewed by a certified technician. A real inspection is the only way to be sure. Terms of Use

Not sure what your car has?

Describe what you see, hear or feel. AI CarCare helps you understand the likely causes and what to ask before you visit a workshop.

Ask AI CarCare about your car

More codes: Network communication