AI CarCare
All OBD-II codes

Fuel and air metering

P2135Throttle/pedal position sensor A/B voltage correlation

Drive carefully and get it checked soon

What does P2135 mean?

P2135 means the two position sensors inside the electronic throttle disagree with each other. They are meant to cross-check each other, so when they disagree the computer can't trust either and usually limits power.

What can cause P2135?

  • A worn sensor track inside the throttle body
  • Damaged, loose or corroded wiring or connector
  • Water or corrosion in the throttle body connector

Only an inspection can tell which of these applies to your car.

What you might notice

  • The check-engine light is on
  • Reduced power mode: the car limits its speed and power to protect itself
  • The engine may not respond to the accelerator at all

Can I keep driving with P2135?

Drive carefully and get it checked soon

Drive gently and only as far as you need. Avoid long trips, high speed and heavy loads, and get it checked within days, not weeks.

The car may suddenly lose power, so avoid motorways and overtaking until it is fixed.

What you can safely check yourself

  • With the engine off and cool, look at the part's plug and wiring for anything loose, broken or chewed. Don't unplug anything while the engine runs.
  • Write down when it happens: cold or warm engine, speed, weather, and any new noise or smell. This helps the technician a lot.

When to see a technician

Soon. The fix is often the throttle body or its wiring.

General information written with AI help; not yet reviewed by a certified technician. A real inspection is the only way to be sure. Terms of Use

Not sure what your car has?

Describe what you see, hear or feel. AI CarCare helps you understand the likely causes and what to ask before you visit a workshop.

Ask AI CarCare about your car

More codes: Fuel and air metering