AI CarCare
All OBD-II codes

Engine computer and voltage

P0606Control module processor

Drive carefully and get it checked soon

What does P0606 mean?

P0606 means the engine computer has detected a fault in its own processor. The engine may stall, not start, or run in reduced power mode. Low voltage or bad ground connections can also set this code, so they are checked first.

What can cause P0606?

  • An internal fault in the engine computer
  • A weak battery or poor battery connections
  • A poor ground (earth) connection to the engine or body
  • Software that needs an update

Only an inspection can tell which of these applies to your car.

What you might notice

  • The check-engine light is on
  • The engine may stall or be hard to start
  • Reduced power mode: the car limits its speed and power to protect itself
  • Several warning lights on at once

Can I keep driving with P0606?

Drive carefully and get it checked soon

Drive gently and only as far as you need. Avoid long trips, high speed and heavy loads, and get it checked within days, not weeks.

The engine may stall without warning, so avoid motorways and busy roads until it is checked.

What you can safely check yourself

  • Look at the battery terminals: they should be tight and free of white or green crust.
  • Think about recent repairs: a part just replaced or a plug left loose is a frequent cause.

When to see a technician

Soon. A technician checks power and ground supplies before condemning the computer.

General information written with AI help; not yet reviewed by a certified technician. A real inspection is the only way to be sure. Terms of Use

Not sure what your car has?

Describe what you see, hear or feel. AI CarCare helps you understand the likely causes and what to ask before you visit a workshop.

Ask AI CarCare about your car

More codes: Engine computer and voltage