Emission controls
P0411Secondary air injection system A incorrect flow detected
OK to drive to a check
What does P0411 mean?
P0411 means the secondary air system, which blows fresh air into the exhaust for a short time after a cold start to heat the catalytic converter faster, is not moving the right amount of air.
What can cause P0411?
- A failed air pump, often after water got into it
- A check valve stuck or burnt
- A cracked hose or a blown fuse or relay
Only an inspection can tell which of these applies to your car.
What you might notice
- The check-engine light is on
- A loud whine or roar for a minute after a cold start, or no sound at all
- The car may fail an emissions inspection
Can I keep driving with P0411?
OK to drive to a check
The car can usually be driven normally to a workshop. Book a check in the coming weeks, and sooner if anything changes.
What you can safely check yourself
- Check the fuse for that circuit in the fuse box, using the diagram in the owner's manual. A fuse that keeps blowing needs a technician.
When to see a technician
Within the next few weeks. It does not affect how the car drives, but it keeps the light on and can fail inspections.
Tampering with emissions equipment, or removing it, is illegal in many countries. Erasing a code does not repair anything: the light comes back once the car tests itself again.
General information written with AI help; not yet reviewed by a certified technician. A real inspection is the only way to be sure. Terms of Use
Not sure what your car has?
Describe what you see, hear or feel. AI CarCare helps you understand the likely causes and what to ask before you visit a workshop.
Ask AI CarCare about your carMore codes: Emission controls
- P0401Exhaust gas recirculation (EGR) A flow insufficient detected
- P0402Exhaust gas recirculation (EGR) A flow excessive detected
- P0420Catalyst system efficiency below threshold (bank 1)
- P0430Catalyst system efficiency below threshold (bank 2)
- P0440Evaporative emission system
- P0441Evaporative emission system incorrect purge flow
- P0442Evaporative emission system leak detected (small leak)
- P0443Evaporative emission system purge control valve A circuit