AI CarCare
All OBD-II codes

Oxygen sensors

P0136O2 sensor circuit (bank 1 sensor 2)

OK to drive to a check

What does P0136 mean?

P0136 concerns the oxygen sensor on bank 1 (the side of the engine with cylinder 1), position 2. It means the engine computer is not getting a sensible signal from the oxygen sensor. Sensor 2 sits after the catalytic converter and mainly checks how well the converter cleans the exhaust.

What can cause P0136?

  • Sensor wiring damaged by exhaust heat or rubbing
  • An ageing or failed oxygen sensor
  • Rarely, a fault in the engine computer itself

Only an inspection can tell which of these applies to your car.

What you might notice

  • The check-engine light is on
  • Usually no change in how the car drives
  • The car may fail an emissions inspection

Can I keep driving with P0136?

OK to drive to a check

The car can usually be driven normally to a workshop. Book a check in the coming weeks, and sooner if anything changes.

What you can safely check yourself

  • With the engine off and the exhaust fully cold, follow the sensor's wire along the exhaust: it should not be melted, rubbing on metal or hanging loose.
  • Listen for ticking or puffing from the exhaust at a cold start: it can mean a leak near the sensor.
  • Ask for every stored code to be read: the other codes stored with it often point to the real cause.

When to see a technician

Within the next few weeks. An oxygen sensor fault is rarely urgent, but a technician should confirm it really is the sensor before replacing it: wiring, exhaust leaks and real fuel-mixture problems can set the same code.

General information written with AI help; not yet reviewed by a certified technician. A real inspection is the only way to be sure. Terms of Use

Not sure what your car has?

Describe what you see, hear or feel. AI CarCare helps you understand the likely causes and what to ask before you visit a workshop.

Ask AI CarCare about your car

More codes: Oxygen sensors